Common Painting Mistakes And Their Solutions

Painting your home is very necessary for making your walls attractive and charming. Paint is essential to keep your house free from many types of creatures and bacterias. It is the easiest and standard method for transformation of your home at less expense.
Paint is also useful in protecting your house against various damages due to bad weather and other climatic conditions. It prevents damage caused by excess heat from the sun, and moisture of rain as well. Painting your home should be done with accuracy and precision. Most often, we make some silly mistakes while painting. Paint is the solution which experts of home renovation in Bangalore suggest when you want a new look at less budget.
Also, many problems may arise after the completion of your painting process. In this article, we will discuss how to fix and correct the common painting mistakes and problems.

Blistering/Bubbling Problem With Paint 

This is the most common type of problem you may have observed in your homes and buildings. Blistering and bubbling of paint arise when the paint film lifts from the underlying surface, most often a wall of your structure. It doesn't matter much to some individuals, but it is enough to make your walls look ugly.
The bubbling and blistering problem's leading cause is a loss of adhesion between the paint film and surface. There are many reasons behind the failure of adhesion, including moisture or heat. You can quickly correct them by rectifying the main reason for blistering.

How To Fix

According to experts, the above problem can be fixed by applying a coat of primer when the area is smooth before painting the surface. Also, you have to investigate and repair the sources of moisture and heat around your building.
On the primer package, you also can see instructions where it is mentioned clearly that you must apply primer before paint and leave it for complete drying. When the primer is thoroughly dried, you can paint the walls with ease.
To maintain the moisture, it is advised to use exhaust fans and vents. The life of the paint can be increased significantly by controlling humidity.

Cracking Or Flaking Of Paint

Cracking or flaking of the paint is another common problem that arises due to a variety of issues. Even a small hairline crack can't be ignored. Cracks in the wall damage all the beauty of walls and it must be corrected.
Experts say the most common reasons for cracking and flaking problems are improper preparation of the surface before painting.
This problem can also happen if you somehow applied an oil-based paint over latex paint. Using cheap quality paint also cheat you in this regard. Sometimes application of color in the wrong environment and using a paint that is too old can cause severe issues to your walls.
Extreme cracking is another is the worst that occurs as a result of applying one or more coat on the surface without letting the previous one dry properly. That's the reason Home Interior Designers in Yelahanka suggest hiring painting experts so that these issues could be prevented.

How To Fix

Use a scraper or wire brush to remove the loose paint. The best way to fix the cracking and flaking problem is cleaning the spoiled reason and repainting it properly. Don't forget to apply a primer before painting the surface.
If cracking is not smooth and it happens in multiple layers of paint, then you can use a filler to regulate it. If cracking goes down to the substrate, then remove all the color with the help of a heat gun. Now sand the surface until it becomes smooth, apply prime and repaint it with a proper quality latex paint.

Is Spreading Of Paint Thin?

You have to choose the proper color combinations while painting. Also, you have to use appropriate methods while painting to avoid one of the common mistakes done while painting that is spreading paint too thin. Home Interior Designers in Yelahanka add that your if your brush is evenly covered but not soaking well, this could also result in an issue. Always read the instructions properly before applying the color. Next time you paint, make sure the paint is evenly spread, even if you are getting it done from a professional, don't forget to monitor their job without irritating them.

Overbrushing

Over Brushing is another common type of mistake done by most of the folks. You have to apply the paint gently over the surface. Fill the brush and apply it over an area. Then try to level the surface by using an equal amount of color for all parts. Over Brushing may lead to the cause of ridges and brush marks which make the appearance of your walls dull. You will find your beautiful walls ruined like nothing.

Choose The Right Paint

Choosing the best quality paint is also a significant step towards the elimination of painting problems. If you don't buy a proper color, all the project will be spoiled irrespective of your appropriate implementation skills.
Cheap quality paints do not provide proper furnishing and attractive looks and are the prior reason for the above mentioned all the problems. Always buy a recognized brand's color. Also, choose the combinations of colors with the help of some professionals for an elegant and fresh look.
The choice of color should also be smart so that the shade brings out the best in your home. Seek the guidance of experts of Home Interior Designers in Yelahanka and choose a paint color that shows your classy choice in addition to making your walls look elegant.
These are some common problems that arise while painting your interiors. We understand that these problems hurt. No one wants to spend on a new paint that looks uglier than even the previous paint. That's why, along with the issues, we have suggested some simple solutions. Moreover, the best thing you can do is higher an interior decorator and let them hire a professional who can save the beauty of your walls.